Error Code 0x8004fc12 Windows Update Issues

Support for Windows update issues Windows operating system often shows several errors due to virus attacks,update failures and file system corruptions. Get help from our experts to fix the Error code 0x8004fc12.

Solutions for Error Code 0x8004fc12 | Update in Windows 10/8/7

This Error Code 0x8004fc12 is commonly caused due to the .NET framework installation failure.These are following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 0x8004fc12 .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x8004fc12 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 0x8004fc12 while updating/up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 0x8004fc12
Chat with our experts

For additional on Error Code 0x8004fc12 support chat with our technical support.

0x80004005, 0x800705B4, 0x80070020, 0x80070422, 0x8024200B,
0x80070643, 0x8024402F, 0x80073712, 80248011, 80200010,
8007371B, 8007370A, 80070570, 80070246, 8E5E03FA, 0x80070190,
80246008, 800F081F, 80073712, 8E5E0147, 8024400d, 0x8004fc12,
0x1000, 8024400a, 0x8024a005, 0x800b010a, 0x4004f00c, 80245003,
800B0101, 80092003, 8007370D, 80070490, 8ddd0018, 0x80200013,
800B0100, 8007370B, 800705B9, 0x80070424, 0x80070003,
0x80070002, 0x80070005, 0x8007005, 0x80072ee7, 80072ee2,

Windows Update Error Code 0x8004fc12 | Solutions

Support for Windows update issues. Windows operating system often shows several errors due to virus attacks,update failures and file system corruptions. Get help from our experts to fix the Error code 0x8004fc12.

Update error code 0x8004fc12 in Windows 10/8/7:

This Error Code 0x8004fc12 is commonly caused due to the .NET framework installation failure.These are following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 0x8004fc12 .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x8004fc12 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 0x8004fc12 while updating/up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

For additional on Error Code 0x8004fc12 support chat with our technical support.

0x80004005, 0x800705B4, 0x80070020, 0x80070422, 0x8024200B,
0x80070643, 0x8024402F, 0x80073712, 80248011, 80200010,
8007371B, 8007370A, 80070570, 80070246, 8E5E03FA, 0x80070190,
80246008, 800F081F, 80073712, 8E5E0147, 8024400d, 0x8004fc12,
0x1000, 8024400a, 0x8024a005, 0x800b010a, 0x4004f00c, 80245003,
800B0101, 80092003, 8007370D, 80070490, 8ddd0018, 0x80200013,
800B0100, 8007370B, 800705B9, 0x80070424, 0x80070003,
0x80070002, 0x80070005, 0x8007005, 0x80072ee7, 80072ee2,
c80003fe, c80003fa, 80070003, 80070663, 80070643, 0x8007000d,
80072efd, 80240020, 0xc0000142, 0x80080005, 0x8024402C,
Windows 10 Update Installation Failure-Error 0xC1900101-0x4000D,
Error Code 0xc190020e windows 10, Error Code 0XC004F074 windows 10,
Windows 10 Upgrade Assistant Stuck at 99% Installing,
Wannacry ransomwear attack,error 0xC1900101-0x4000D,
windows 10 creators update (version 1703) 

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatlive support chat

Error Code 80072ee2 | Windows Update Error

Error Code 80072ee2: Support for windows operating system windows operating system often shows several errors due to virus attacks,update failures and file system corruptions. Get help from our experts to fix the Error code 80072ee2.

How To Fix 80072ee2 Update error in Microsoft Windows 10/8/7

This Error Code 80072ee2 is commonly caused due to the .NET framework installation failure. These are following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 80072ee2.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 80072ee2 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 80072ee2 while updating/upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fixit tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fixit tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take backup of your desktop files, pictures, downloads, documents before proceeding to completely clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 80072ee2
Live Support

For additional on Error Code 80072ee2 support chat with our technical support.

0x80004005, 0x800705B4, 0x80070020, 0x80070422, 0x8024200B,
0x80070643, 0x8024402F, 0x80073712, 80248011, 80200010,
8007371B, 8007370A, 80070570, 80070246, 8E5E03FA, 0x80070190,
80246008, 800F081F, 80073712, 8E5E0147, 8024400d, 0x8004fc12,
0x1000, 8024400a, 0x8024a005, 0x800b010a, 0x4004f00c, 80245003,
800B0101, 80092003, 8007370D, 80070490, 8ddd0018, 0x80200013,
800B0100, 8007370B, 800705B9, 0x80070424, 0x80070003,
0x80070002, 0x80070005, 0x8007005, 0x80072ee7, 80072ee2,
c80003fe, c80003fa, 80070003, 80070663, 80070643, 0x8007000d,
80072efd, 80240020, 0xc0000142, 0x80080005, 0x8024402C,
Windows 10 Update Installation Failure-Error 0xC1900101-0x4000D,
Error Code 0xc190020e windows 10, Error Code 0XC004F074 windows 10,
Windows 10 Upgrade Assistant Stuck at 99% Installing,
Wannacry ransomwear attack,error 0xC1900101-0x4000D,
windows 10 creators update (version 1703) 

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatlive support chat

Windows Update Error Code 8007370A | Solutions

This Error Code 8007370A is commonly caused due to the .NET framework installation failure. These are following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

Solutions for Error code 8007370A:

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 8007370A .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8007370A still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 8007370A while updating/up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note : while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8007370A
Error code 0x80040201

For additional on Error Code 8007370A support chat with our technical support.

0x80004005, 0x800705B4, 0x80070020, 0x80070422, 0x8024200B,
0x80070643, 0x8024402F, 0x80073712, 80248011, 80200010,
8007371B, 8007370A, 80070570, 80070246, 8E5E03FA, 0x80070190,
80246008, 800F081F, 80073712, 8E5E0147, 8024400d, 0x8004fc12,
0x1000, 8024400a, 0x8024a005, 0x800b010a, 0x4004f00c, 80245003,
800B0101, 80092003, 8007370D, 80070490, 8ddd0018, 0x80200013,
800B0100, 8007370B, 800705B9, 0x80070424, 0x80070003,
0x80070002, 0x80070005, 0x8007005, 0x80072ee7, 80072ee2,
c80003fe, c80003fa, 80070003, 80070663, 80070643, 0x8007000d,
80072efd, 80240020, 0xc0000142, 0x80080005, 0x8024402C,
Windows 10 Update Installation Failure-Error 0xC1900101-0x4000D,
Error Code 0xc190020e windows 10, Error Code 0XC004F074 windows 10,
Windows 10 Upgrade Assistant Stuck at 99% Installing,
Wannacry ransomwear attack,error 0xC1900101-0x4000D,
windows 10 creators update (version 1703) 

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatlive support chat

How to fix Error Code 8007370A | Windows Update Issues

Error Code 8007370A: Windows operating system often shows several errors due to virus attacks, update failures and file system corruptions. Get help from our experts to fix the Error code 8007370A.

Solutions for Error Code 8007370A WINDOWS 7/8/10:

This Error Code 8007370A is commonly caused due to the .NET framework installation failure. These are following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 8007370A .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8007370A still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 8007370A while updating/up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note : while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8007370A
Live Support

For additional on Error Code 8007370A support chat with our technical support.

0x800040050x800705B40x800700200x800704220x8024200B
0x80070643, 0x8024402F, 0x8007371280248011802000108007371B,
8007370A80070570, 800702468E5E03FA0x80070190, 80246008, 800F081F80073712, 8E5E0147, 8024400d, 0x8004fc12, 0x1000, 8024400a, 0x8024a005, 0x800b010a, 0x4004f00c, 80245003, 800B0101, 80092003, 8007370D, 80070490, 8ddd0018, 0x80200013, 800B0100, 8007370B, 800705B9, 0x80070424, 0x80070003, 0x80070002, 0x80070005, 0x8007005, 0x80072ee7, 80072ee2, c80003fe, c80003fa, 80070003, 80070663, 80070643, 0x8007000d, 80072efd, 80240020, 0xc0000142, 0x80080005, 0x8024402C, Windows 10 Creators Update-Installation Failure-Error 0xC1900101-0x4000D, Error Code 0xc190020e windows 10, Error Code 0XC004F074 windows 10, Windows 10 Upgrade Assistant Stuck at 99% Installing, Wannacry ransomwear attack, error 0xC1900101-0x4000Dwindows 10 creators update (version 1703) 

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatlive support chat

Error Code 8007370a: Update Error for Windows 7, 8, and 10

windows operating system often shows several errors due to virus attacks,update failures and file system corruptions. Get help from our experts to fix the Error code 8007370A. + 8007370A windows update error -WINDOWS 7/8/10

This Error Code 8007370A is commonly caused due to the .NET framework installation failure.These are following ways in which you can attempt to correct this error.

Solutions for Error Code 8007370a:

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

pic showing windows update error 8007370A

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 8007370A .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8007370A still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update Error Code 8007370a while updating:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note : while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8007370A

For additional on Error Code 8007370A support chat with our technical support.

0x800040050x800705B40x800700200x800704220x8024200B0x800706430x8024402F,0x8007371280248011802000108007371B8007370A80070570800702468E5E03FA0x80070190,80246008800F081F800737128E5E01478024400d0x8004fc120x10008024400a0x8024a005,0x800b010a0x4004f00c80245003800B0101800920038007370D800704908ddd00180x80200013800B01008007370B800705B90x800704240x800700030x800700020x80070005,0x80070050x80072ee780072ee2c80003fec80003fa8007000380070663800706430x8007000d,80072efd802400200xc00001420x800800050x8024402CWindows 10 Creators Update-Installation Failure-Error 0xC1900101-0x4000D,Error Code 0xc190020e windows 10Error Code 0XC004F074 windows 10, Windows 10 Upgrade Assistant Stuck at 99% InstallingWannacry ransomwear attack,error 0xC1900101-0x4000Dwindows 10 creators update (version 1703) 

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chatMicrosoft live support chatlive support chat

Update Error Code 8024400d in Windows 10/8/7

windows operating system often shows several errors due to virus attacks,update failures and file system corruptions. Get help from our experts to fix the Error code 8024400d.

This Error Code 8024400d is commonly caused due to the .NET framework installation failure.These are following ways in which you can attempt to correct this error.

Solutions for Error Code 8024400d

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

pic showing windows update error 8024400d

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 8024400d .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8024400d still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 8024400d while updating/up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 

SDF cleaning method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

For additional on Error Code 8024400d support chat with our Technical Support.

8024400d 
Chat with our Experts

Microsoft chat supportMicrosoft live supportMicrosoft live chat supportMicrosoft support live chat

Microsoft live support chatlive support chat

How to Update Windows Defender Updates

Windows Defender Updates which will also provide real time protection which is inbuilt in windows 10. Read more to know more about windows defender.

Defender in Windows 10 or Windows 8.1 is configured to automatically download and install definition updates using Windows Update, once a day.

If for some reason, your Windows Defender will not be updated automatically, or if you want to download and save definition updates to be able to update Windows Defender offline, in different installations of Windows 10/8/7 / Vista, then this publication will be of your interest

We have already seen how to download Windows Update manually. Today we will see how you can update Windows Defender manually in Windows 10, Windows 8.1 and Windows 7. I will also give you links to download updates for Microsoft Security Essentials in the publication.

Update Windows Defender manually:

First, check if you are using a 32-bit or 64-bit version of Windows 10 / 8.1 / 7. Once you know the version of Windows installed on your device, download the installers from the following links:

  • Download for Windows Defender on Windows 10, Windows 8.1 / 8: 32 bits | 64 bits | ARM.
  • After that, Download definition updates for Windows Defender on Windows 7 and Windows Vista: 32 bits | 64 bits
  • Download definition updates for Microsoft Security Essentials: 32 bits | 64 bits

Once the file has finished downloading, go to your download location and double-click on the mpam – fe.exe file. Follow the instructions to install the update.

If you believe that some malware prevents the installation of Windows Defender definition updates, you may want to run a scan with Microsoft Safety Scanner or to detect more stubborn malware, using offline.

These Links Will Surely Interest You Too:

  • Even when Windows Automatic Updates are disabled
  • Windows Defender is off or does not work
  • Cannot activate Windows Defender
  • Add Scan with Windows Defender to the context menu.
Windows Defender Updates
Chat with our Experts

Chat with us for more support, Our Technical Experts available for support you.

How to Solve Windows Error Code 80072F78

This post mainly about to fix the Windows Update Error Code 80072f78 and related error windows update errors in windows 10/8 operating system. These steps should help with all errors and not just the ones listed. If you have reached this step and it is not solved then it will advise you to reset the computer.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

Windows Update Error 80072f78 Support:

Error code 80072f78

Downloading updates should be set on to update automatically but this does come with its own problems. One of them being if you are a person that uses a pre-paid data service it could use up all your data and you will probably be unaware that it is happening.

Generally, Windows updates use a lot of data and if there is a problem with the particular network that you are using it could have problems due to the length of time it takes and if it is a poor network the interruptions could cause errors with the update.

The Solution Applies the Following Versions of Microsoft Windows

  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 10

Causes of Windows update error 80072f78 :

  • Internet connectivity issue
  • Temp store file location contains active malware

Steps to fix the Troubleshooting Windows Update Error 80072f78:

Updated outdated drivers in Windows:

Windows allows manually updated the divers. In case Windows 10 automatically download the new drivers or you install the new drivers from the downloaded manufacture’s website.to identify your hardware drivers and find suitable drivers from the manufactures and updated manually.

Open the system and go to the start menu.

Then enter the control panel from the search box and open it.

Here we go to click on system and security after that go to click on system.

Then open the new window and go to click on advanced system settings.

Then open the system properties window and open the hardware and go to click on device installation settings.

Finally, open the new window and click on related options and press save changes.

If you choose the former, Windows will automatically install the driver and ask you to reboot the computer afterward. The latter allows you to update the driver with the driver file that you have downloaded. This step should fix windows update error 80072f78 and related errors.

Reinstall Windows Update:

Open the Run Window through the Windows key+R

Then enter the services.msc in the command box and press ok.

Right-click Windows Update in the Services management console, and then select Stop. If you are running Windows, right-click Automatic Updates, and then select Stop.

After Windows Update stops, right-click Windows Update, and then select Start. If you are running Windows, right-click Automatic Updates, and then select Start.

Check Corrupted System Files:

Goto the Windows key+R and click it.

Then open the Run Window and enter the cmd in a search box after that press ok.

Then open the command prompt and type the command SFC/Scannow in the command prompt and press enter.

The system will take some time to check. Let it run for a while. If it finds any issues in “os” integrity it will automatically fix it.

Disable Windows firewall temporarily:

Open the system and goto the start menu

After that enter, the firewall in the search box then left-clicks on the Windows firewall in the control panel.

Then click on Turn on Windows Firewall on or off.

Open both firewalls like private and public.

Then set both firewalls to turn off and press ok.

After that goto the start menu and enter the cmd in the search box.

Then right-click on the cmd and select the Run as administrator and press yes.
Finally, some commands are entered in the command prompt and press enter.

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

Then finally Re-enable your firewall is on.

If the issue still persists, please initiate the chat, One of our Certified Microsoft technicians will help you. If you are having issues in upgrading/updating the operating system/office products in your computer please write us on support@microsoftliveassist.com.We provide support for Microsoft products like Windows and Office and Outlook, we can also set up free tools provided and included with Microsoft Windows and can train you on how to use them to maintain the health of your computer. You can also ask for System Repair Image support or some Recovery help, we also restore your computer to a point when it was working fine without any issues.

We provide support for Microsoft products like Windows and Office and Outlook, we can also set up free tools provided and included with Microsoft Windows and can train you on how to use them to maintain the health of your computer. You can also ask for System Repair Image support or some Recovery help, we also restore your computer to a point when it was working fine without any issues.

Error Code 80072F78
Chat with our Experts

Chat with our technician to fix your computer issues Now!

Related Error code issues:


0x800700c1

Microsoft office support

Background installation ran problem

Error code 0x80200013

Solutions for Windows Update Failure Error Code 0x8007000d

The Error Code 0x8007000d normally a activation failure error. It happens when your product activation files could not find by source file. It may occurs with many products like windows upgrading, office 2010, office 2013, office 365 activation failures.

How to Fix Error Code 0x8007000d in Windows

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

0x8007000d
Error 0x8007000d

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error Code 0x8007000d.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

Solution Steps Error Code 0x8007000d

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x8007000d still exists, follow some more steps to fix the issue and install/upgrade/update your operating systerm.

Try These Solutions To Fix Windows Update Error Code 0x8007000d While Updating/Upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fixit tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fixit tool- for WINDOWS 10 click here, for window 7/8/8.1.

SDF Cleaning Method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 0x8007000d
Chat with our Experts

For additional on Error Code 0x8007000d support chat with our Technical Support.