How to Fix Error Code 80070663 Support

Error Code 80070663 is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 80070663  error code might occur because of improper removal of the previous version of office.

This Error Code 80070663 applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 80070663.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.

Run Windows Update Troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 80070663 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can Try These Solutions to Fix Windows Update Error 80070663 While Updating/Upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of the cases this system file scan fix common issues with the file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it a tool, this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps.

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose the right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download Fixit tool- for WINDOWS 10 click here, for window 7/8/8.1 click here. 

Outlook Error Code
Chat with our Experts

Read More Error codes:

error code 30015

Office error 30175

Error code 30103

Microsoft contact number

How to Fix Error Code 80246008 Support

This Error Code 80246008 is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 80246008 error code might occur because of improper removal of the previous version of office.

Error Code 80246008 Windows 10 & 8

This Error Code 80246008 applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 80246008.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.

Run Windows Update Troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 80246008 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

80246008
80246008-Live Support

You can Try These Solutions to Fix Windows Update Error 80246008 While Updating/Upgrading:-

  1. Perform an sfc scan so that you can fix potentially corrupted or missing files, most of the cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps.

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most of serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-Image /Restore Health

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.
80246008-Live Support
Chat with our Experts

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x80246008, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x80246008. Note that these are possibly resolved by installing security update 3005628.

For additional on Error Code 80246008 support chat with our technical support.

How To Solve Error Code 0x8024200B Windows 10 Update

This Error Code 0x8024200B is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

Error Code 0x8024200B Solution:

This 0x8024200B  error code might occur because of improper removal of the previous version of office. ,

This Error Code 0x8024200B applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 0x8024200B.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x8024200B still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can Try These Solutions To Fix Windows Update Error 0x8024200B While Updating/Up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

Error Code 0x8024200b
Chat with our Experts

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note : while deleting, it may prompt for admin permission. If you are logged in as an admin user. just click on ok to proceed.

Resetting Operating System:-

windoows errorerror 0x8024200B -0x4000d
Error 0x8024200B update

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

For additional on Error Code 0x8024200B Support Chat With our Technical Support.

Error code 1007

Microsoft error 30015

Update Error 30145

Office 365 support

Gmail settings

 

[Best Solutions] How to Fix Error Code 80245003

This Error Code 80245003 is commonly caused due to the .NET framework installation failure. These are following ways in which you can attempt to correct this error.

This 80245003  error code might occur because of improper removal of the previous version of office.

Solutions for Error Code 80245003 :

This Error Code 80245003 applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid error code 80245003.

Error code 80245003 
Microsoft Live support

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks. Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 80245003 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can Try These Solutions to Fix Windows Update Error 80245003 While Updating/Up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps.

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files :-

For most the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 80245003
Chat with our Experts

For additional on Error Code 80245003 support chat with our Technical Support

[Fix] How to Solve Error Code 8007370B

This Error Code 8007370B is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 8007370B error code might occur because of improper removal of the previous version of office. ,

This Error Code 8007370B applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7

Error Code 8007370B  Solution Support:

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid error code 8007370B.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8007370B still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can Try These Solutions to Fix Windows Update Error 8007370B while Updating/Upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of the cases this system file scan fix common issues with the file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it a tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common file System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most of the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note: while deleting, it may prompt for admin permission. If you are logged in as an admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8007370B
Chat with our Experts

For additional on Error code 8007370B support chat with our Technical Support.

How to Fix Error Code 0xc0000142 in Windows 7/8/10

Error Code 0xc0000142 is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 0xc0000142 error code might occur because of improper removal of the previous version of office. ,

This Error Code 0xc0000142 applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

Solutions for Error Code 0xc0000142:

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 0xc0000142.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks. Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0xc0000142 still exists, follow some more steps to fix the issue and install/upgrade/update your operating systerm.

You Can try These Solutions to Fix Windows Update Error 0xc0000142 While Updating/Upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fixit tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files :-

For most of serious issues, and to save your time the best way to fix this critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose the right Fixit tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method , we clean and re create the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF).
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 0xc0000142
Chat with our Experts

For additional on Error Code 0xc0000142 support chat with our Technical Support

How to Fix Error Code 8E5E0147- Live Updates

This Error Code 8E5E0147 is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 8E5E0147 error code might occur because of improper removal of the previous version of office. ,

This Error Code 8E5E0147 applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7

Error code 8E5E0147 – Microsoft Live Support

This 8E5E0147  error code might occur because of improper removal of the previous version of office. ,

This Error Code 8E5E0147  applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 8E5E0147.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks. Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8E5E0147 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You can try these solutions to fix windows update error 8E5E0147 while updating/upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it a tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC scan method for common file system issues to fix windows update error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps.

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using restore health option to fix corrupted files:-

For most the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows update troubleshooter/fix it tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF cleaning method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Go to C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.
Resetting Operating system:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8E5E0147
Microsoft Live Chat Support

For additional on Error Code 8E5E0147 support chat with our technical support.

How to Fix Windows Update Error Code 0x4004f00c – Windows7/8/10

This Error Code 0x4004f00c is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 0x4004f00c error code might occur because of improper removal of the previous version of office. ,

This Error Code 0x4004f00c applies for all versions of windows like Windows 10, Windows 8 & 8.1 and Windows 7

0x4004f00c
Error code 0x4004f00c
   Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed .Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. So enable the .NET Framework 3.5 in Control Panel to avoid Error code 0x4004f00c .

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5 . The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x4004f00c still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can try These Solutions to Fix Windows Update Error 0x4004f00c While Updating/Up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most of the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as an admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files,pictures,downloads,documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

Read More Error codes

For additional support chat with our technical support.
Microsoft installation support

Office 365 installation support

Windows update help

How to Fix Error Code 0x80070190

This Error Code 0x80070190 is commonly caused due to the .NET framework installation failure. These are the following ways in which you can attempt to correct this error.

This 0x80070190 error code might occur because of improper removal of the previous version of office.

Solutions for Error Code 0x80070190

This Error Code 0x80070190 applies for all  versions  of windows like Windows 10, Windows 8 & 8.1 and Windows 7

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid Error code 0x80070190.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks. Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 0x80070190 still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can Try These Solutions to Fix Windows Update Error 0x80070190 While Updating/Upgrading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of the cases this system file scan fix common issues with the file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool, this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues To Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps .

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to a good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool:-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose the right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note : while deleting, it may prompt for admin permission. If you are logged in as an admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 0x80070190
Chat with our Experts

For additional on Error Code 0x80070190, support chat with our Technical Support.

How to Fix Error Code 8007370D Support

This Error Code 8007370D is commonly caused due to the.NET framework installation failure. These are the following ways in which you can attempt to correct this error.

Disclaimers: Before you attempt to fix an issue with the windows update, we highly recommend you to take a registry backup and create a system restore point as a precaution method. In case if something goes wrong, we can restore your computer to the same stage and fix the issues. (In case if you not sure how to back it up, talk to an expert for assistance.)

This .NET Framework 3.5 for Windows 8 or Windows 8.1 won’t come with pre-installed. Windows 8, Windows 8.1 or Windows 10, and must be separately enabled to run applications that depend on it. To enable the .NET Framework 3.5 in Control Panel to avoid error code 8007370D.

Note: Make sure you have set correct Date and time on your computer, try to install pending updates through other available networks.Run windows update troubleshooter.

  1. Control Panel> Programs and Features.
  2. Turn Windows features on or off then check .NET framework 3.5. The pre-requisites should installed.
  3. If it is not successful uninstall the KB’s related to .NET framework 3.5 and then re-install them.
  4. Restart your computer if needed.

If the windows update error code 8007370D still exists, follow some more steps to fix the issue and install/upgrade/update your operating system.

You Can Try these Solutions to Fix Windows Update Error 8007370D While Updating/Up grading:-

  1. Perform a sfc scan so that you can fix potentially corrupted or missing files, most of cases this system file scan fix common issues with file system.
  2. To do a restore to healthy previous setup with command prompt to fix potentially corrupted or missing files
  3. Using windows update troubleshooter fix it tool , this is also a good tool to automatically fix most common issues.
  4. By cleaning SDF (Software distribution folder) for a clean slate for Windows Update or renaming so machine itself creates a fresh one in next update.
  5. Resetting PC

Simple SFC Scan Method for Common File System Issues to Fix Windows Update Error:-

System file scanning process is very simple to try while fixing issues with windows issues. Just follow these steps.

  • Open command prompt in admin mode, to do this Type CMD in windows start menu search and right-click on CMD application to get through Run as admin option.
  • In the command prompt window, type SFC/SCANNOW and press enter,
  • The scanning process takes some time to return results.

Using Restore Health Option to Fix Corrupted Files:-

For most of the serious issues, and to save your time the best way to fix these critical issues are restoring to good healthy partition. Before doing this stop the windows update services.

Open the command prompt as admin (Mentioned above in sfc scan process), Then instead of running sfc scannow command type this following command in the window.

DISM.exe /Online /Cleanup-image /Restorehealth

After sometime your machine will be restored to good healthy state. Now you can start your windows updates as usual.

Windows Update Troubleshooter/Fix it Tool :-

Microsoft has released several fix it tools/patches for most of updates issues. Depends on your requirement choose a right fix it tool for your issue and run it on your machine. This will help you when there are simple issues like folder missing errors, permissions related issues.

Download fix it tool- for WINDOWS 10 click here, for window 7/8/8.1 click here.

SDF Cleaning Method:-

In this method, we clean and recreate the software distribution folder by deleting all temporary files in it.

  1. Goto C:/ drive, then open windows named folder in it.
  2. Open SoftwareDistribution folder (SDF)
  3. Open DataStore folder and then delete all files and folders in it.
  4. Again go back to SoftwareDistribution folder, open the Download folder and delete all files in it.
    Note :while deleting, it may prompt for admin permission. If you are logged in as admin user. just click on ok to proceed.

Resetting Operating System:-

Follow this when you have less knowledge in windows technology about command prompts, files and registry fixing steps.

  • If you are using windows 10, just type in “RESET PC” in the Cortana search bar(windows start button search) and select RESET PC from the results.
  • Then under the RESET PC, click on get started button to proceed.
  • There are two options to keep your files and complete clean. (You must take back up of your desktop files, pictures, downloads, documents before proceeding to complete clean.)
  • After reset, you may do updates cleanly without any issue. This resetting process takes time so please do it when you don’t have any urgent work with your computer.

During installation you may encounter error 0x800f0906, 0x800f0907, or 0x800f081f, in which case refer to .NET Framework 3.5 installation error: 0x800f0906, 0x800f0907, or 0x800f081f. Note that these are possibly resolved by installing security update 3005628.

Error Code 8007370D
Chat with our Experts

For additional on Error Code 8007370D support chat with our Technical Support.

Microsoft office support

Windows update

Office 365 support